Oriental rugs make great floor coverings and give an aesthetic look to your living area. Carpets add colour, beauty and warmth to the floor and change the entire room’s look. When you place it in any room, you wish it would last unchanged for the most extended period. Hence, you require regular carpet repairing to retain this new look. Here are some steps related to carpet repair that will help you understand the process.

MATERIALS AND TOOLS:

Utility knife

Gloves

Masking tape

Empty can

Marker

Single-sided carpet tape

Scissors

Carpet

WHAT KIND OF GLUE IS USED FOR CARPETS?

The sticky material is used to attach the carpet to the floor; these include:

Latex paint

Matte medium

Elmer’s glue

PVA glue

Carpet adhesive

Mask latex

HOW TO REPAIR CARPET:

Learn how to go for carpet repair with these step-by-step directions, so the carpet repair is mixed in perfectly:

STEPS:

1. When handled rightly, the process of carpet repair eradicates the damaged surface with minimal or nil indication. Remains from the fitting of the carpet make the job a little trouble-free. In case you don’t find any leftovers, trim a small portion of carpet from the back of the nearest or another outside of the space to provide a repair piece.

2. Position an empty container or another box of suitable size on the nap part of the carpet repair section and press down steadily, permitting the edge to make a clear impression. Then cut the layout which you have outlined using a sharp helpful knife.

3. Use tape marked with a pointer to specify the direction of the carpet’s nap on the carpet repair section. Then utilise another length of mark to identify the direction of the rest near the damaged region of the rug.

4. Using the same box or the can or container, press it down securely over the damage.

5. Carefully trim along the outline with a sharp knife. The apt choice to replace the piece during carpet repair is to use a standard-sized can diameter. The aim is to keep the cutout region as little as possible but still permit carpet tape to be placed into the space and put flat below the carpet support.

6. To make sure the carpet tape doesn’t work its way back around the opening, trim a length 2 to 3 inches wider than the diameter of the cutout region. Carpet tape is available in reversible and partial versions; the partial type usually works great for this type of repair. Peel the support away from the sticky side of the tape and carefully place the piece into the cutout region. Now smoothen it flat form below so that it sticks steadily to the carpet, supported around the perimeter of the opening. While handling the tape and fixing it for the carpet repair, one needs to be very calm and composed. It will be best to use half region of tape to attach with one piece and the remaining half is attached to the new cutout piece.

7. Once the carpet tape is securely placed, turn the repair piece, so its indicator points in the same direction as the arrow near the cutout region & press it steadily into the opening. You must apply more pressure all around the edges of the fresh piece, working the fibres into the surrounding carpet.

8. After the piece is fitted comfortably into the opening, trim any uneven fibres with the surrounding carpet. To remove the uneven surface, put a pair of scissors flat over the new section and carefully cut off just enough to mix the piece into the fibres.

9. Place heavy-weight furniture or a bundle of books, etc., to cover and maintain the pressure on the repaired area for a day or two.

However, oriental rugs are subjected to all kinds of damage-inducing experiences by the very nature of their use. They get walked over due to various reasons like heavy furniture creating irreversible dents. Apart from that, butterflies eat away at the fibers, and of course, they are frequently at the receiving end of all kinds of spills. All these lead to calling a service provider for carpet repair.